How to Get Rid of Brown Well Water

How to Get Rid of Brown Well Water: 4 Methods & Solutions

Brown well water is a common problem that many homes face. It not only makes your water look unappealing, but it also poses health risks for people who drink it on a regular basis. Brown well water can be caused by high levels of iron in the groundwater which will cause rust to form and coat all surfaces within the home.

How do you get rid of brown well water? The following guide has everything you need to know about getting rid of this unsightly problem!

How Will You Get Rid of Brown Well Water?

Several factors can cause brown water in a well. A rusted water pipeline to a collapsed well is an example of such an issue. What are the best ways to figure out what’s causing the epidemic, given the wide variety of potential causes?

The Most Common Causes of Dirty and brown Well Water Although you do not test your well water for bacteria contamination, brown or red-colored water after heavy rain may indicate contamination.

Factors to be Considered When Facing Brown Water Problem:

Sediment, commonly rust or manganese, causes brown water. Many older plumbing fixture pipes are made of iron, which usually destroys over time. Rust will cause the water to turn brown if it gets into a pipe.

  • Your water has a metallic flavor to it, as well as an irritating odor.
  • Your water looks discolored, like when it first comes out of the tap or after a few minutes of waiting.
  • You have ferric iron in your well water, whether it comes out red, yellow, or orange straight from the tap. It normally occurs when the iron in your water supply has come into contact with oxygen and begun to rust.
  • You potentially have ferrous iron in your water if it starts clean from the tap but turns red or brown after a while.
  • The aeration tank is followed by the filter. 
  • Your hot tub or basin has brown or rust-colored circles surrounding it
  • Your clothing and appliances have well water brown or yellow dirt stains. 

What are the Reasons for Brown Well Water?

• Iron ore

• Rust

• Tannins

• Silt

Iron Ore: 

Minerals such as sulfur or iron ore are commonly found in groundwater. The presence of a large amount of iron in your water will cause it to turn brown or reddish. A variety of factors cause dirty and brown well water. Even if you don’t screen your well water for bacteria, brown or red water after heavy rains might mean an iron bacteria contamination problem.

Iron in water is generally not harmful; rather, it will benefit you by holding metal in your diet. However, iron water will stain your clothes and cause plumbing issues.

How to Remove Iron Ore From Well Water?

You can check the water for iron with a water test.

If you discover that iron ore is the source of the problem, the most popular solution is to use a water softener device. A water softener device cleans the magnesium and calcium in the water by ion exchange, commonly used with hard water with a high PH hardness. A water softener, on the other hand, can strip iron from the water. Finally, a water softener is a cost-effective option.

However, it can use any of the following techniques to remove an iron filter and eliminate brown well water.

• Filtration is the process of removing impurities from

• Ion trade-in greensand (Most common for removing iron)

• Aeration is a term used to describe the process of (Least common for removing iron)

Controlling iron is the most common method for controlling iron in water in-home water treatment.


Water that passes through rusted pipes will turn brown. The tanks, not the well water, are the cause of the brown hue.

If you have brown water coming from some of your house’s taps but clear water coming from others, you might have a problem with your pipes.

If you live in an old house with lead-soldered plumbing, you can get your water tested for lead poisoning.

How to Remove Rust From Well Water?

Rust removal is straightforward, but it is often mistaken for iron. It would help if you first determined which pipes are rusted by observing which taps are leaking brown water and then following the pipes.

Once you’ve identified the rusted tubing, you can patch them as soon as possible, preferably with the help of a plumber. You can have clean water until the pipes are removed.

If it’s just the hot tap producing hot brown water, the water pump is most likely to blame since the hot water comes directly from the water heater.


Tannins, which are often dissolved from leaves, will turn the water brown. It occurs mostly in lakes and ponds, but if you’re well is small, you can often see brown water in the fall.

Dry leaves collect on the field at that moment, and water percolates into them, creating tea. Tannins are not poisonous, but they will dye your clothing and alter the flavor of your water.

How to Remove Tannins From Brown Well Water?

To begin, make sure that tannins are the source of the brown water because successful removal can be expensive. The only way to get rid of brown well water is first to figure out what’s behind it.

To see if tannins are the issue, rake the leaves around your house and any plant-based debris on the ground outside, wait a week, and check to see if the well water is still brown.

If it has cleared up, tannins are the source of the problem.

It’s difficult to get rid of tannins, and there’s no surefire way to do it.

However, the first thing you can do is keep raking the leaves and plant litter outside your house; if you can keep up to keep the water clean, that’s ideal. Any tannins can, however, make their way through the aquifer.

You’ll need to invest in an ion exchange system, reverse osmosis system, or oxidation system to eliminate Tannins, and you’ll need someone to do the plumbing.


When water contains suspended rocks, leaves, or organic matter, it turns brown. If you see sand in your bath, check your well filter because the silt settles to the bottom of the water after a while.

How to Remove Silt From Well Water?

According to your problem, we have solutions to how to get rid of brown well water and water-related diseases.

Since silt sinks to the bottom of the water, the presence of silt in your water could indicate that the water table has dropped, and your pump is now operating at an insufficient level.

If your pump is set so low, the sand at the bottom of your well will be hoovered up.

What’s the solution? Increase the pressure in the pump.

If the pump is not the cause, you may even get a filtration water device with good drilling to flush out any sediments that the pump could have sucked up. It will leave the house with clean water, and you’ll have learned how to remove silt from a well and get rid of brown water.

Contaminants in well-brown water can be harmful to your family’s health and cause many diseases. If all of the four reasons mentioned above are present, you won’t know if the water is safe to drink, so it’s smarter to be overly cautious.

We’ll try to include some detail about getting rid of brown well water in the following section.

Let’s look at some of the possible causes of brown well water.

How to Get Rid of Brown Well Water?

Filtration Systems – water filters are instruments that use biological processes, additives, and physical barriers to remove impurities from water. 

  • Air aspirated filter that removes ferrous iron and adds oxygen to the water. It then converts ferrous to ferric from your brown well water filter.
  • Carbon filters exclude any chlorine flavor or odor from the water.

Water softeners – are instruments that are used to soften rough water. They substitute potassium or sodium ions for magnesium and calcium ions (the ions that cause hardness).

  • Pro: if the resin concentration isn’t too high, it may be removed.
  • Cons: The resin bed can collapse after 2-3 years and will need to be replaced.

Distillation Systems – in this system, polluted water is heated, and steam is filtered and stored in a separate tube, leaving solid waste behind.

Disinfection – is a chemical or physical method that destroys or deactivates pathogenic microorganisms. Heat, electronic radiation, and ultraviolet light are examples of physical disinfectants. Ozone, chlorine dioxide, and chlorine are examples of chemical disinfectants.


Contaminated water has a major impact on a person’s health. So, we must ensure that we have access to safe drinking water; otherwise, we will suffer Water-Related Diseases. To get rid of the brown well water, you should not only extract the iron, but you must remove any other contaminants from your well water as well.

Our inspiration for beginning to write was to give you advice about how to get rid of brown well water. We tried to cover all of the reasons why you have brown well water in the whole piece. Furthermore, depending on your problem, we have discussed some ideas for getting rid of brown well water.

Test your water and tackle the concerns that are causing your well water to turn brown. Once you’ve found the problem, you’ll be given a solution based on it.

Frequently Asked Questions

How does iron get into well water?

The majority of iron in your well water comes from the earth’s crust while seeping in.

What are the effects of iron in water on your home?

Staining: Iron will stain your porcelain bathroom fixtures, laundry, and pans.

Metallic taste and Smell: Water with high iron concentrations have a metallic flavor and odor.

Is iron in water dangerous?

No, in most cases, iron in water does not pose a health risk.

Is It Essential to Test Your Water?

Testing will determine whether the filtering process is working properly and whether your source water condition has improved.

How can I get rid of my water’s high iron content?

Katolox filtration process is used for brown well water; it can remove all copper, magnesium, and hydrogen sulfide.

Is bacteria in well water harmful?

Diarrhea, dysentery, salmonellosis, hepatitis, and guardians can all be caused by these microorganisms.

What’s the only way to repair a brown water faucet?

Start by running the faucets at full force for around 20 minutes or until the water is fully clear. A small amount of rust will dislodge from a pipe’s inner walls and get into the water supply. If the issue is slight, merely running the water can remove the rust, dirt, and bacterial contamination and clear the water.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *